ERYONE PLA Filament 1.75mm, 3D Printer Filament PLA, +/-0.03mm, 1kg(2.2lbs)/Spool, Transparent

Summary:Like all Eryone filament I've used, this one has been fantastic for the price and hit all the checkboxes. It's stiffer and stronger than normal PLA, it's has very consistent extrusion resulting in hidden layer lines, and it prints easily. It needs to be calibrated well in order to achieve good tolerances for holes and pins.Long Review:The spool arrived inside a vacuum sealed bag with a dessicant packet, inside a cardboard box. The bag is not reusable. I weighed the spool and filament at 1175g, and then ran it through the dryer for 24 hours to see if there was any moisture. After weighing again, it was coming out around 1174.5g, so it pulled extremely little moisture out, and it might have been a rounding error on my scale. So that's great; perfectly dry filament from the factory!I print on a Bambu X1C, so I removed the AMS system and made sure I was using the 0.6mm hardened steel nozzle. Just a warning: this filament is rough, so it will chew through brass nozzles and plastic gears. I had no issues with my hardened steel nozzle and mounting the spool on the rear/side spool holder.After calibrating the filament fully, I arrived at a K-value of 0.04, an extrusion multiplier of 0.98, a print temperature of 225, and a max volumetric flow of (amazingly) 28mm3/s at 235 degrees. I only printed at a max of 20mm3/s because I wanted to print slightly cooler at 225 degrees. This gave me a final speed of about 150mm/s at a 0.62 line width and 0.2 layer height. However, I always turn the exterior wall speed way down (to about 70mm/s so that I don't risk any ugly surfaces). I also printed a couple tolerance tests to see how well the filament could print perfectly sized holes and pins. I got it down to 0.25 offset, but didn't try to get it lower. I think the rough nature of the filament will cause some swelling of the final model, so plan accordingly.My prints came out fantastic. I printed a Ryuk model from Fotis Mint on Printables, and a Broke Sword model from Nikko Industries. The models are lightweight, but probably twice as rigid as normal PLA. However, with enough force, this filament (like all PLA) will snap and shatter before it bends. If you need something that can deflect and bend, you need to look at other materials. This Carbon Fiber excels at stiff, rigid prints. Visually, the models look beautiful. The layer lines are extremely well hidden due to the excellent consistency and the rough feeling nature of the filament. This is rougher than what you would feel with a "marble" or glow-in-the-dark PLA print. It's not like it will hurt your hands at all, but it just has a gritty feel. The sheen is comparable to Satin, I would say. It's not a perfectly smooth gloss, but definitely not matte either. Again, the rough texture gives it a unique sheen.Overall, I like it a lot and will be ordering again when I need to make a strong piece that prints smoothly.

If you’re on the fence about getting this filament, just get it. The color is absolutely beautiful, and my print came out perfectly. The layers adhere well, and supports come off cleanly. The sparkle and shine is stunning, especially in the sunlight. I will be getting all of the other burnt titanium colors

Very surprised at the color of the filament, different levels of light make a big difference. It prints perfectly, no tangles on the spool and no issues with the print itself. I used supports out of habit but this stuff is sturdy, don’t think I’ll need them.However the supports came off beautifully, nothing to cleanup like my other filaments. 10/10 would recommend

I purchased this filament because I thought the color & finish looked great on the main photo. I also was unfamiliar with this brand and wanted to try it out. After printing three items on my Bambu P1S, I can say that this filament does print well. I had no problems with adhesion, stringing, etc. However, there are a couple of issues. Mainly, the finished result does not look like the photo in the listing. The listing photo shows the filament to have a glossy, blue-green appearance. The actual appearance is more of a flat charcoal with green sparkles throughout. While the final result is still nice, it is not what I was expecting when making this purchase. I am now somewhat hesitant to buy more from this brand.

Pros-Tangle free & looks beautiful prints well @ high speeds. Con-don’t use the last 20 feet there was a glue that stuck the filament to the cardboard roll.

I needed a beautiful green filament to print my christmas tree with and thought this color would look great. It did not disappoint, the look and feel of the filament is great. I didn't have the same issues as others mentioned, stuck to my pei sheet, no clogs, came out perfect really however I did have to baby sit it as it kept getting stuck unwinding in my ams. I know this happens at times so it wasnt a big deal. This looks like it has glitter in it, if you are getting clogs try using a .6 nozzle to help prevent them. I have another big christmas tree print now with it because it is just that beautiful!

The media could not be loaded. Have to dial it a bit for adhesion in beginning for large objects, but when you find the right temperature for your machine to prevent clogging too, this filaments is just great. My first flexi turn out awesome.Even tiny parts print well like this fishing hook holder.

Another Eryone filament that hits the mark. Nice subtle blend of colours and easy printing using generic PLA settings and high speeds of around 200-300mms. This filament offers great bed adhesion and dimensional accuracy as shown with the articulated tail. Overall happy with the results and another great filament from my go-to brand!

PLA di ottima qualità, molto bello esteticamente. Nonostante sia un pla caricato con fibra di carbonio, non ho riscontrato nessuna difficoltà nella stampa. Ho utilizzato setup consigliati nella bobina, ovvero temperatura a 195 gradi.Anche l' adesione al piatto è ottima, io ho usato 50 gradi. Infine ugello classico da 0.4.Molto soddisfatto del prodotto.

Filamento di alta qualità per stampe eccellenti e affidabili"Ho acquistato il filamento ERYONE PLA da 1,75 mm per diversi progetti di stampa 3D e sono rimasto molto soddisfatto dei risultati. Se stai cercando un filamento che offre ottime prestazioni, facilità d'uso e un buon rapporto qualità-prezzo, questo prodotto è una scelta ideale.Caratteristiche apprezzate:Precisione dimensionale: Il filamento ha una tolleranza di diametro di +/- 0,03 mm, il che garantisce un flusso costante durante la stampa. Questo si traduce in meno problemi di estrusione e una qualità di stampa più uniforme.Facilità di stampa: Ho trovato questo PLA molto facile da lavorare, anche senza un piatto riscaldato. L'adesione al piano di stampa è ottima, riducendo al minimo il rischio di deformazioni o distacchi durante la stampa.Qualità delle stampe: Le superfici delle mie stampe risultano lisce e con dettagli ben definiti. Il filamento si fonde in modo uniforme, permettendo di realizzare modelli complessi senza problemi.Varietà di colori: ERYONE offre una vasta gamma di colori vivaci e interessanti. Personalmente, ho provato il colore bianco e il risultato è stato un bianco puro, perfetto per successivi processi di verniciatura o finitura.Difetti riscontrati:Confezionamento migliorabile: Anche se il filamento arriva sigillato e con un sacchetto disidratante, ho notato che la bobina non ha un foro per bloccare l'estremità del filamento quando non in uso. Questo può causare srotolamenti accidentali se non si presta attenzione. Ho risolto utilizzando un fermaglio per tenere fermo il filo.Sensibilità all'umidità: come molti filamenti PLA, è sensibile all'umidità ambientale. Consiglio di conservare la bobina in un contenitore ermetico o utilizzare sacchetti con zip e bustina di gel di silice per mantenerlo asciutto quando non in uso.Consigli personali:Impostazioni di stampa ottimali: Ho ottenuto i migliori risultati stampando a una temperatura dell'estruso tra 200°C e 210°C e con una velocità di stampa di 60 mm/s. Ovviamente, potrebbe essere necessario adattare queste impostazioni in base alla tua stampante.Test iniziale: Se è la prima volta che utilizza questo filamento, ti consiglio di stampare un piccolo modello di prova per calibrare le impostazioni e assicurarti che tutto funzioni correttamente.Conclusioni:Il Filamento ERYONE PLA 1,75 mm è un prodotto di qualità che offre risultati affidabili e di alto livello. È adatto sia per principianti che per utenti esperti che cercano un filamento facile da usare e che garantisce stampe di qualità. Nonostante qualche piccolo difetto nel confezionamento, i vantaggi superano di gran lunga gli svantaggi.Spero che questa recensione ti sia utile nella tua decisione d'acquisto.

I recently tried Eryone Wood PLA in the Pottery colour, and I'm extremely impressed with the results! The filament has a unique, earthy tone that closely resembles natural terracotta, making it perfect for artistic projects or designs that need a rustic, handcrafted look.Pros:Print Quality: The prints come out smooth, with a slight texture. The layers fuse well, and I didn’t experience any clogs or jams.Color: The Pottery color is great—subtle yet rich, adding a natural warmth to the printed objects. It's especially great for decorative pieces like vases, figurines, or any project where you want that handmade aesthetic.Ease of Use: The filament works well with my standard PLA settings. I didn’t need to adjust temperatures significantly, and it adheres well to the print bed.Strength: The printed objects feel durable and have a bit of flexibility, making them less brittle than some other wood PLAs I've tried.Cons:Surface Finish: While I love the texture, the prints do have a slight grainy surface, which might not be for everyone. If you're looking for a super-smooth finish, some post-processing may be needed.Stringing: There's a bit more stringing than with regular PLA, but it's easy to clean up and didn't affect the overall quality of the prints.Overall, Eryone’s Wood PLA in Pottery is a fantastic choice for anyone wanting a natural, earthy finish on their prints. It’s easy to work with and produces beautiful results. Highly recommended for artistic and decorative prints!